Split
Cable Stop SCS--$0.40
SCSD---$0.95
(DOUBLE cable stop)
SCST---$1.45
(TRIPLE cable stop)
Cable
Guide
CG---$1.95
SURLY disk brake housing guide
DISKGUIDE---$3.75
Cantilever Brake Boss-3 adjusting holes
FCBB (front)---$4.95 pair
RCBB (rear)---$4.95 pair
The difference between front and rear bosses is the radius of the miter at the base. For most applications, they are interchangeable.
Water
Bottle Boss
WBB---$0.45
Water Bottle Bolt (5mm x 10mm)
WBBOLT---$0.55
BOLT5X16---$0.65 (5x16mm - longer water bottle bolt)
NUTLOCK5---$0.55 (Nut with nylon lock for the 5mm threaded bolt)
Brake Bridge. Holes for recessed brake bolts.
SBB---$3.95
Chain Hanger
CH---$1.95
Stem Binder Allen Bolt - 6mm x 20mm. Stainless. For stem clamp binder boss (above).
BOLT6MIL---$.75
BOLT6x10---$.65 (10mm long)
NUTLOCK6---$0.65 (Nut with nylon lock for the 6mm threaded bolt)
Disk Caliper Mount - Cromoly disk mount tab. International standard hole distance - 51mm center to center. Made out of 1/4" thick plate. Depending on your design, you may have to do some plate modification.
DISKMOUNT---$14.95
Fork
Crown Race - for 1 " steerer tube
CROWNRACE---$2.95 (for 1 " steerer tube)
CROWNRACE118---$2.95 (for 1-1/8 " steerer tube)
Bottom
Bracket Plastic Cable Guide - 2 wire. A good way to
attch to the bottom bracket is to use a water bottle boss
and bolt.
UBBCG---$2.45
Seat
Tube Collar -Fits 1 1/8 " seat tube for quick
release. Style may vary.
STCB---$7.95
Seat
Binder Boss - For quick release. Not threaded on
either side..
STCB-QR---NO LONGER AVAILABLE. Use STEMBIND (see right). You can drill the threaded part to slip on a quick release lever.
Stem
Clamp Binder Boss - Threaded on one side. 6 x1x20mm
bolt not included. Also used as seat binder boss.
STEMBIND---$1.95
Alloy
Seat Clamp -Sizes for 1 1/8 " , 1 1/4" and 1 3/8"
seat tube. Bolt or quick release not included. See
below.
SCLAMP118---$9.95 (for 1 1/8") Includes a quick release
SCLAMP318---$6.95 (for 1 1/4")
SCLAMP349---$6.95 (for 1 3/8")
SCLAMP254---$4.25 (for 1"-BMX, includes bolt)
Shift
Lever Boss
SLB---$3.45 each
Shift Lever Boss Conversion Stop - Converts your existing road bike shift lever boss into a cable stop for road bike STI use. Left and right.
SLBCONVERS---$24.95
Rack Carrier Boss. 5 x .8mm thread.
RCB---$2.45
Front
Derailleur Boss
FRDERBRAZEON---$7.95
Chainstay
Bridge.
CB---$3.25 NO LONGER AVAILABLE. Suggest using scrap tubing.
Seat Binder Bolt. Cromoly Bolt M6 x 45mm. Aluminum nut and cap washer. 5mm hex head. Knurled binder nut. Silver
SBBOLT---$5.95
RACK
DROPOUT EYELET. 5 mm hole. Can also be used as a
front lowrider brazeon on fork.
EYEBRAZE---$1.50
Cable
Tension Adjuster. Allows tensioning of cables.
Inserts between your cable stop and cable housing.
AJBARRELL---$3.95
VELCRO STRAP. Forget to braze a cable guide ? Sometimes using a velcro strap is easier. Use it secure pumps, cable housings etc. About 9" long.
STRAP---$1.95
ROCK N ROLL Spoke Nipple Cream - Spoke Nipple Fastener. Locks your spokes after wheel building or truing.
SPOKELOCK---$14.95
KALLOY
Seat Quick Release. Alloy seat quick release with cam
lever for standard ATB seat clamp. Cromoly skewer with nylon
threadlock end caps. 40mm skewer length. Styles and color
may vary. Usually in black or silver
SQR--$7.95
Need a wider quick release ? We
have a front hub folding bike quick release designed for
74mm wide hubs.
Seatstay Rack Clamp. Forgot to brazeon seatstay rack eyelets ? Use this clamp on rack mount. Works from 14 to 16mm seat stays. Pair.
RACKCLAMP--$3.95